<var id="l1tzn"></var>
<var id="l1tzn"></var>
<var id="l1tzn"></var>
<cite id="l1tzn"><video id="l1tzn"><menuitem id="l1tzn"></menuitem></video></cite>
<cite id="l1tzn"></cite>
<var id="l1tzn"></var>
<var id="l1tzn"></var>
<var id="l1tzn"><video id="l1tzn"><thead id="l1tzn"></thead></video></var>
<cite id="l1tzn"><span id="l1tzn"><menuitem id="l1tzn"></menuitem></span></cite>
<cite id="l1tzn"><span id="l1tzn"><menuitem id="l1tzn"></menuitem></span></cite>
<cite id="l1tzn"></cite>

Phone: +86-577-85858287 丨 Email: sales@bstpsteel.com

ASTM A790/A790M-13a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe


Abstract

The specification covers seamless and straight-seam welded ferritic/austenitic steel pipe for general corrosive service, with particular emphasis on resistance to stress corrosion cracking. The pipe shall be made by the seamless or an automatic welding process, with no addition of filler metal in the welding operation. Heat analysis shall be made to determine the percentages of the elements specified. Tension tests, hardening tests, flattening tests, hydrostatic tests and nondestructive electric tests shall be made to conform to the specified requirements.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification2 covers seamless and straight-seam welded ferritic/austenitic steel pipe intended for general corrosive service, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures.

1.2 Optional supplementary requirements are provided for pipe when a greater degree of testing is desired. These supplementary requirements call for additional tests to be made and, when desired, one or more of these may be specified in the order.

1.3  Appendix X1 of this specification lists the dimensions of welded and seamless stainless steel pipe as shown in ANSI B36.19. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the M designation of this specification is specified in the order.

Note 1—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as nominal diameter, size, and nominal size.

2. Referenced Documents (purchase separately)

ANSI Standards

B1.20.1 Pipe Threads, General Purpose
B36.10 Welded and Seamless Wrought Steel Pipe
B36.19 Stainless Steel Pipe
AWS Standard

A5.9 Corrosion-Resisting Chromium and Chromium-Nickel Steel Welding Rods and Electrodes
SAE Standard

SAE J 1086
ASTM Standards

A370 Test Methods and Definitions for Mechanical Testing of Steel Products

A923 Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

A999/A999M Specification for General Requirements for Alloy and Stainless Steel Pipe

E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing

E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

E426 Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

Keywords

Corrosive Service Applications - Duplex Stainless Steel - Seamless Pipes And Tubes - Seamless Stainless Steel Tubes - Seamless Steel Pipes - Stainless Steel Pipes - Steel Pipes - Stress Corrosion Cracking - Tubular Products - Welded Pipes And Tubes - Welded Stainless Steel Pipes - Welded Steel Pipes