<var id="l1tzn"></var>
<var id="l1tzn"></var>
<var id="l1tzn"></var>
<cite id="l1tzn"><video id="l1tzn"><menuitem id="l1tzn"></menuitem></video></cite>
<cite id="l1tzn"></cite>
<var id="l1tzn"></var>
<var id="l1tzn"></var>
<var id="l1tzn"><video id="l1tzn"><thead id="l1tzn"></thead></video></var>
<cite id="l1tzn"><span id="l1tzn"><menuitem id="l1tzn"></menuitem></span></cite>
<cite id="l1tzn"><span id="l1tzn"><menuitem id="l1tzn"></menuitem></span></cite>
<cite id="l1tzn"></cite>

Phone: +86-577-85858287 丨 Email: sales@bstpsteel.com
TP347,TP347H,UNS S34700, S34709,1.4550, 1.4912,X6CrNiMo18-10,X7CrNiNb18-10

Material No.

1.4550/1.4912
EN symbol 

X6CrNiNb18-10    X7CrNiNb18-10

AISI/SAE347/347H
UNSS34700/S34709
AFNOR

Z6CNNb 18.10

B.S.

347S31/347S51

Standards----

Description

Alloy 347 is a stabilized, austenitic, chromium steel containing columbium which allows for the elimination of carbide precipitation, and, consequently, intergranualr corrosion. Alloy 347 is stabilized by the additions of chromium and tantalum and offers higher creep and stress rupture properties than alloy 304 and 304L which may also be used for exposures where sensitization and intergranualr corrosion are of concern. The addition of columbium also allows Alloy 347 to have excellent corrosion resistance, even superior to that of alloy 321.  347H is the higher carbon composition form of Alloy 347 and demonstrates improved high temperature and creep properties.

Alloy 347 can be used in air up to 850°C (1560°F) and in steam up to 750°C (1380°F). It is suitable for use in mild synthesis gas up to about 550°C (1020°F),Creep behaviour should also be taken into account when using the steel in the creep range.In flue gases containing sulphur, the corrosion resistance is reduced. In such environments this steel can be used at temperatures up to 600-750°C (1110-1380°F) depending on service conditions. Factors to consider are whether the atmosphere is oxidising or reducing, i.e. the oxygen content, and whether impurities such as sodium and vanadium are present.

Chemical composition (%)

  C Mn P S Si Ni Cr Mo     Ti   Cb/Ta   
TP3470.082.000.040.0300.759.0-13.017.0-20.0min:10xC max: 1.0
TP347H0.04-0.102.000.040.0300.759.0-13.017.0-20.0 
min:10xC max: 1.0
1.45500.082.000.040.0151.009.0-12.017.0-19.0 
min:10xC max: 1. 


Mechanical Properties:

GradeTensile StrengthYield Strength 0.2%Elongation -% in  50 mm (min.)HardnessHardness
ksi (min.)Offset ksi (min.)(Brinell) MAX(Rockwell B) MAX
TP34775303520195

TP347H

75303520195
1.455075303520195

Convert ksi to Mpa Formula:  ksi/0.1450377

Welding filler for welded pipe & tube

*The weldability of Alloy 347 is good. Suitable welding methods are manual metal-arc welding with covered electrodes and gasshielded arc welding with the TIG and MIG methods as first choice. Preheating and post-weld heat treatment are not normally necessary.

*Since the material has low thermal conductivity and high thermal expansion, welding must be carried out with a low heat input and with welding plans well thought out in advance so that the deformation of the welded joint can be kept under control. If, despite these precautions, it is foreseen that the residual stresses might impair the function of the weldment, we recommend that the entire structure be stress relieved. See under "Heat treatment".

*As filler material for gas shielded arc welding we recommend wire electrodes and rods AWS ER347Si /EN number 19 9 Nb Si or AWS ER347/ EN number 19 9 Nb  In manual metal-arc welding covered electrodes AWS E347-17 are recommended.

 

Main fields of application(depending on the specific conditions of use)

Alloy 347 is frequently used for the fabrication of equipment, which must be placed in service under severe corrosive conditions, and is also common to the petroleum refining industries. Applications that consistently used Alloy 347 include:

High temperature chemical processes
Heat exchanger tubes
High temperature steam service
High pressure steam pipes
Radiant superheaters
Boiler tubes
Heavy duty exhaust systems
General refinery piping